ROURE PINION

FROM € 5000

FRAME

Titanium Gr.9 Ti-3Al-2,5V, Tire clearance 76mm-584 (27,5" PLUS) and 57mm-622 (29") W/ Belt port // Sliding dropouts with Thru Axle 142x12mm and Post Mount brake mounts // 31,6mm seatpost // Internal cable routing for rear brake (top tube), rear light (top tube), Pinion shifter cables (down tube) and dropper seatpost (down tube and seat tube) // Oversized TR ID44mm headtube // Mounting holes for mudguard, rear rack, 3 water cages and 3-Pack on seat stays // NuaBikes logo engraved on the head tube // Hand brushed finish

FORK

Segmented // Titanium Gr.9 TI-3Al-2,5V Oversized tubing // Tire clearance 76mm-584 (27,5" PLUS) and 56mm-622 (29") // Tapered 1-1/8" to 1-1/2" steerer // Disc brake PostMount 180mm // Thru Axle dropouts 100x12mm // Mounting holes for mudguards and 3-Pack on each blade // Internal cable routing for brake housing (left blade) and dynamo hub wire (right blade)

HEADSET

A top quality, ‘worry free’ headset with a semi-integrated upper part and an external lower part, for head tubes with a 44mm internal diameter. German made, with stainless steel angular ball bearings in CNC machined aluminium caps (Only Black)

+110 €

Legendary quality and durability, the only headset with a lifetime warranty! Made in the USA, a tapered headset with a semi-integrated upper part and an external lower part, with stainless steel angular ball bearings in CNC machined aluminium caps. BLACK

+120 €

Legendary quality and durability, the only headset with a lifetime warranty! Made in the USA, a tapered headset with a semi-integrated upper part and an external lower part, with stainless steel angular ball bearings in CNC machined aluminium caps. RED

GEARING

High-end sports car transmission technology, made in Germany. Being centrally mounted, this gearbox has the advantage of better weight distribution than an IGH, meaning improved manoeuvrability. With a super-light magnesium casing. Its 600% range is perfect for touring, as well as day-to-day riding in any terrain.

+470 €

High-end sports car transmission technology, made in Germany. Being centrally mounted, this gearbox has the advantage of better weight distribution than an Internal gear hub, meaning improved maneuverability for your bicycle. With a super-light machined alloy casing. It's impressive 636% range is the higher you will find on any gear system on this planet.

BRAKES

The high-end mountain bike brakes of the Shimano range, these are the industry standard for high-quality brakes. Extremely reliable and powerful, thanks to the use of mineral oil and Shimano's high-quality brake pads, these brakes are also easy to maintain.

+100 €

With the same specifications as the XT 8000, but with 4 pistons instead of the usual 2, giving them 20% more braking power. These brakes are especially indicated for heavy loads or long descents.

TRANSMISSION

Extremely durable, this drive system performs in the harshest conditions. Like all Gates drives it’s clean, silent, and virtually maintenance-free. Also, it doesn’t rust, which is a huge advantage in icy (and therefore salty) or wet climates. We use the stainless steel sprockets version for the maximum durability, and an all black belt.

CRANKS

Rugged quality forged aluminium cranks which come standard with all Pinion gearboxes.

+90 €

High-end CNC cranks, machined from 7075 alloy billets. Compatible with all Pinion gearboxes.

PEDALS

If you want to use your own pedals, choose this option.

+70 €

High-quality CNC design offer excellent grip on the trail and impress with a robust design. 8 pins per pedal side provide lots of safety – while the wide platform offers lots of space to change the position of your feet. Specs: 16 pins per pedal, 8 pins per side // Dimensions: approx. 100 x 98 x 18 mm // Bearings: extra long sleeve bearing, two sealed stainless steel cartridge ball bearings // Seal: R2 (rubber lip seal) // Material axle: CrMo steel (chrome-molybdenum alloy) // Weight: approx. 343 g (pair)

+90 €

The Shimano XT PD-T8000 pedals are a lightweight (392g the pair), high-end solution for those looking for a hybrid pedal that can be used both as a flat pedal (on one face) or as an SPD-compatible pedal (on the other face). This is the perfect choice for adventure bikes if you want to be able to use them during your everyday commute with normal shoes too.

RIMS

Riders who like the idea of giving their tires some extra volume and support will find the ideal partner with the XM 481. Its full 30 mm of inner width together with a minimal hook and perfect tubeless compatibility make it ready to tackle all demanding trails, both up and down the mountain or any terrain. Weight= 490gr // Max. system weight = 120 Kg // 32 Spokes. We will use the 27,5" or 29" version to hand build your wheels, according with the tire size selected. Note: We remove the stickers by default. If you want we keep them, just let us know.

+20 €

Extra wide 40mm to use exclusively with 27'5" PLUS (3") tires. Weight= 595gr // Max. system weight = 120 Kg // 32 Spokes. Note: don't select this rim if you choose 29er tires. Note: We remove the stickers by default. If you want we keep them, just let us know.

SPOKES

DT-Swiss Competition spokes are double-butted, with a 1.8mm diameter middle section and 2.0mm ends, reducing weight and increasing flexibility for a wide range of uses. They are cold-forged for ultimate strength and durability.

FRONT HUB

A top quality front hub from Kappstein in Germany. It's light and stylish, and it meets all the requirements to be the perfect hub on our bikes: Thru Axle 12mm, 32 Spokes and 6 Bolt rotor.

-60 €

Choose this option if you choose the below "integrated lighting system" option, where a SON 28 dynamo hub is included.

REAR HUB

A high-end rear hub designed specifically for the Pinion gearbox. It sports 120 points of engagement to minimise free play and instantly transmit pedaling torque to the rear wheel. 32 holes; 142x12mm thru-axle version.

+50 €

This new generation hub was developed in cooperation with the hub and wheel specialists from DT Swiss®. The H3R is a single-speed hub optimized for Pinion gearboxes and is built around the proven RATCHET® freewheel system. Due to the HYBRID technology it is specifically designed for high-load applications. It is equipped with the new HYBRID steel freehub body and feature a reinforced axle and hub body. It stand for proven DT Swiss technology and straightforward functionality with low care and maintenance required.

WHEEL AXLES

Top quality Thru Axles designed, tested and made in Bend, Oregon, USA. We use a special version made to accept anti-theft magnetic inserts from Hexlox, so they'll be ready for them whether you choose to add them to your bike now (you'll see the option below), or in the future.

TIRES

Designed to combine high grip and low rolling resistance on mixed surfaces, this all-purpose tyre is equally at home on mountain trails and asphalt roads. Super-wide, it can roll at very low pressure, offering great natural suspension exactly where it matters most: near the ground.

+0 €

This tyre in its 27,5"x2,8" version is a perfect choice for the mountains and mud. Its compound and knob profile are designed to provide a good grip on any surface. Its carcass and sidewall technology provide good puncture resistance with adjusted weight. Compatible with tubeless technology.

+0 €

The G-One Allround 29" folding tyre from the Schwalbe is a true all-round gravel tyre that masters a wide range of terrain unhindered by its versatility, and promises you reliable and safe grip on tours.

TUBES

If you prefer the old and good way to run your tires, choose this option and we will install top quality tubes from Schwalbe

+20 €

If you prefer a tubeless setup, choose this option and we will install on your wheels quality tubeless valves and tape from DT Swiss and some Effetto Mariposa Sealant.

STEM

A go-to stem for quality builds. Made in the USA, it claims to have the best combination of weight and strength available. Rugged enough for downhill riding but light enough for cyclocross.

+50 €

Ultralight stem from Tune, which still offers a high strength through its optimized conical shape. CNC machined and finished in a gloss black anodized

+70 €

A supremely lightweight and durable option to match your titanium frame, with a slim and minimalist design.

SEATPOST

An industry standard for seatposts. With forged clamps, an integrally machined head, and elliptically extruded 7000 series aluminium body. Extremely easy to adjust the saddle position and angle.

+70 €

If you’d like to match your Nua frame with an elegant and minimalist seatpost which gives a more comfortable ride thanks to the flexibility of titanium, choose this option. Laser engraved Nua logo.

SEATPOST CLAMP

The SC2 saddle clamp from 3min19sec has two cross nuts. They make sure that the clamping bolt is always straight. The bolt is also easier to tighten and the tension is evenly distributed over the entire clamping area

+20 €

Exquisite minimal and super light collar from Tune in the Black Forest, Germany. BLACK

+20 €

Exquisite minimal and super light collar from Tune in the Black Forest, Germany. RED

HANDLEBAR

If you’d like to match your Nua frame with an elegant and minimalist handlebar which gives an extremely comfortable ride thanks to the flexibility of titanium, choose this option. Weighing only 215g, it’s 660mm long with a sweepback of 7°.

+30 €

If you’d like to match your Nua frame with an elegant and minimalist handlebar which gives an extremely comfortable ride thanks to the flexibility of titanium, choose this option. 720mm long with a backsweep of 6°, and with 20mm of rise for a more comfortable riding position or to give that special touch to your bike.

+120 €

We affectionately call our adventure/bikepacking bar Toro Loco (Crazy Bull) for obvious reasons. It's 27º back sweep make it super comfortable and the horns give you and extra hand position very similar to the "hoods" position found on a drop (road/gravel) bar, making it also perfect for gravel and commuting.

SADDLE

With a similar design to the B-17 but constructed in weather-proof materials: a vulcanised natural rubber top for flexible performance requiring no breaking-in period, and a waterproof nylon cover which performs flawlessly in all conditions. With a 162mm width, it is designed for a semi-upright riding position. BLACK

+120 €

Designed and made in Berthoud workshop, based in beautiful South Burgundy, France, with the best thick vegetable tanned leather. Designed with randonneuring and long distance riding in mind, with a width of 157mm will give you maximum comfort with a slightly angled torso position. This is the high end version with titanium rails, offering superior vibration dampening and less weight.. Aravis has a highly resistant technical composite backplate and nose parts for flex and vibration dampening and is fully serviceable with only 2 standard tools (5mm allen key and TX20 key) BLACK

+120 €

Designed and made in Berthoud workshop, based in beautiful South Burgundy, France, with the best thick vegetable tanned leather. Designed with randonneuring and long distance riding in mind, with a width of 157mm will give you maximum comfort with a slightly angled torso position. This is the high end version with titanium rails, offering superior vibration dampening and less weight.. Aravis has a highly resistant technical composite backplate and nose parts for flex and vibration dampening and is fully serviceable with only 2 standard tools (5mm allen key and TX20 key) BROWN

-80 €

If you want to use your own pedals, choose this option.

GRIPS

Brooks Rubber grips with an organic cotton covering for a natural look and feel. With a chunkier diameter, they are a comfortable and practical option. 130/100mm BLACK

+10 €

Perfectly matching Brooks Cambium Saddles, Brooks Ergonomic Grips are durable and weatherproof rubber handlebar grips with a pleasant touch and feel, shaped for more comfort and variable hand positions. 100/130mm BLACK

+20 €

Especially suitable for long-distance riding. An ergonomically designed grip with a compact bar-end, offering extra hand positions for increased comfort.

LIGHTING SYSTEM

If you'd prefer not to add lights to your bike at this point, choose this option.

+450 €

A complete and permanent lighting system integrated into your bike. Battery-free, worry-free and powered by your own legs (although so efficient that you won’t notice it). Composed of a Supernova E3 Pure front light (installed on the handlebar or on the fork crown), and E3 Tail Light 2 (installed on the seat post or on rear rack if you have one). If you choose this option we will build your front wheel with the efficient and light German-made SON 28 dynamo hub, the best one out there. We add the new SON coaxial hub connector to make easier wheel removal.

USB CHARGER

Choose this option if you do not want a USB charger on your bike.

+170 €

CinQ The Plug5 Pure is a state-of-the-art power supply system designed to charge USB devices through a dynamo hub. It is water- and shock-proof and generates a 5V/1,2A current suitable for any USB device. It is installed in your fork steerer, replacing the standard headset top cap. NOTE: In order to use a USB charger, you must select a permanent light pack option, as the charger functions thanks to the dynamo front hub.

BOTTLE CAGE

Choose this option if you'd prefer not to have a bottle cage.

+40 €

A super-lightweight titanium bottle cage to match your frame. Easily adjusted for the perfect bottle fit.

+80 €

Two super-lightweight titanium bottle cages to match your frame. Easily adjusted for the perfect bottle fit. One for your downtube and one for your seattube.

BELL

Choose this option if you'd prefer not to add a bell to your bike.

+25 €

Based in Japan, Crane is recognized as creating beautiful and nice sounding bicycle bells. The E-NE is their smallest and most minimalist model, in matte black.

+50 €

San Francisco-based Spurcycle has managed to create what seems to be the most beautiful bell in the world. With an elegant design worked down to the essentials, this bell makes a fine adornment on your Nua. Its strong and pleasing tone sounds up to 3 times longer compared to other bells, made possible by high-grade premium brass and stainless steel craftsmanship. Precision built in the USA for a lifetime of way clearing.

FINAL PRICE: 5000.00 € + Taxes

TAXES

For bicycles shipped within the EU, we will add the VAT of the country of destination.

For bicycles shipped outside the EU, taxes or import duties will be charged by customs in the country of destination.

SHIPPING RATES

EUROPE: Bicycles 190€ / Framesets 110€

UK: Bicycles 260€ / Framesets 140€

Switzerland: Bicycles 260€ / Framesets 140€

USA: Bicycles 450€ / Framesets 250€

Other destinations: Check

All prices include shipping insurance

DELIVERY TIME

18 weeks

PAYMENT

By wire transfer, 50% deposit to order, 50% balance before shipping.

Please fill in the form below with your personal data and your email address. Once done, click on "SEND" to receive a pdf file with a quote of your configuration.