SÍLICE PINION

FROM € 5400

FRAME

Titanium Gr.9 Ti-3Al-2,5V Tire clearance 57mm-584 (650B/27,5") and 44mm-622 (700C/28") W/ Belt port // Sliding dropouts with Thru Axle 142x12mm and Post Mount brake mounts // 27,2mm seatpost // Internal cable routing for rear brake and rear light (top tube) and Pinion shifter cables (down tube) // Oversized TR ID44mm headtube // Mounting holes for mudguard, rear rack and 2 water cages // NuaBikes logo engraved on the head tube // Hand brushed finish

FORK

NUA CF-FORK Adventure // Full Carbon // Tire clearance 57mm-584 (650B/27,5") and 44mm-622 (700C/28") // Tapered carbon steerer 1-1/8" to 1-1/2" // Thru Axle 100X12mm // Mounting holes for mudguards // 3-Pack mounting holes on each blade // Internal cable routing for brake housing (left blade) and dynamo hub wire (right blade) // Black painted

+230 €

Unicrown // Titanium Gr.9 Ti-3Al-2,5V // Tire clearance 57mm-584 (650B/27,5") and 44mm-622 (700C/28") // Tapered 1-1/8" to 1-1/2" steerer // Disc brake PostMount 160mm // Thru Axle dropouts 100x12mm // Internal cable routing for brake housing (left blade) and dynamo hub wire (right blade) // Mounting holes for mudguards // Mounting hole (M6) on the crown (front) for light // Hand Brushed finish

HEADSET

A top quality, ‘worry free’ headset with a semi-integrated upper part and an external lower part, for head tubes with a 44mm internal diameter. German made, with stainless steel angular ball bearings in CNC machined aluminium caps (Only Black)

+110 €

Legendary quality and durability, the only headset with a lifetime warranty! Made in the USA, a tapered headset with a semi-integrated upper part and an external lower part, with stainless steel angular ball bearings in CNC machined aluminium caps. BLACK

+120 €

Legendary quality and durability, the only headset with a lifetime warranty! Made in the USA, a tapered headset with a semi-integrated upper part and an external lower part, with stainless steel angular ball bearings in CNC machined aluminium caps. RED

GEARING

High-end sports car transmission technology, made in Germany. Being centrally mounted, this gearbox has the advantage of better weight distribution than an IGH, meaning improved manoeuvrability. With a super-light magnesium casing. Its 600% range is perfect for touring, as well as day-to-day riding in any terrain.

+470 €

High-end sports car transmission technology, made in Germany. Being centrally mounted, this gearbox has the advantage of better weight distribution than an Internal gear hub, meaning improved maneuverability for your bicycle. With a super-light machined alloy casing. It's impressive 636% range is the higher you will find on any gear system on this planet.

SHIFTER

This especial rotary shifter for Pinion is designed to work on the dropbar tops. Rotary shifters can shift lots of gears at the same time and are simple, worry free, robust and needs no maintenance or adjustment.

BRAKES

This hybrid system is super powerful, bombproof and easy to adjust and maintain. Juintech brake calipers are hydraulic, with 4 pistons that make it very powerful. Their closed, sealed and maintenance-free hydraulic circuit makes them maintenance-free. These calipers are actuated from 2 Sram levers by cable, so the simplicity of the system cannot be greater. The kit includes compressionless cable housing and Shimano rotors.

TRANSMISSION

Extremely durable, this drive system performs in the harshest conditions. Like all Gates drives it’s clean, silent, and virtually maintenance-free. Also, it doesn’t rust, which is a huge advantage in icy (and therefore salty) or wet climates. We use the stainless steel sprockets version for the maximum durability, and an all black belt.

CRANKS

Rugged quality forged aluminium cranks which come standard with all Pinion gearboxes.

+90 €

High-end CNC cranks, machined from 7075 alloy billets. Compatible with all Pinion gearboxes.

PEDALS

If you want to use your own pedals, choose this option.

+60 €

The Acros Urban: sporty, good-looking and suitable for daily use. The pedals come with large platform with replaceable grip tape for high grip in wet conditions. Whether for shopping tours or daily commutes. High-quality sealed cartridge bearings with first-class sliding properties provide stability and durability. Specs: Pedal pad: anti-slip 3M™ grip tape (replaceable) // Replaceable reflectors and Acros clip-on plates // Pedal body: aluminium, CNC milled // Spindle: CrMo steel // Bearings: extra-long sleeve bearings, sealed stainless steel cartridge ball bearings // Dimensions: approx. 78 x 102 x 18 mm // Weight: approx. 350 g (pair)

+70 €

High-quality CNC design offer excellent grip on the trail and impress with a robust design. 8 pins per pedal side provide lots of safety – while the wide platform offers lots of space to change the position of your feet. Specs: 16 pins per pedal, 8 pins per side // Dimensions: approx. 100 x 98 x 18 mm // Bearings: extra long sleeve bearing, two sealed stainless steel cartridge ball bearings // Seal: R2 (rubber lip seal) // Material axle: CrMo steel (chrome-molybdenum alloy) // Weight: approx. 343 g (pair)

+90 €

The Shimano XT PD-T8000 pedals are a lightweight (392g the pair), high-end solution for those looking for a hybrid pedal that can be used both as a flat pedal (on one face) or as an SPD-compatible pedal (on the other face). This is the perfect choice for adventure bikes if you want to be able to use them during your everyday commute with normal shoes too.

TIRES

Designed to provide excellent grip on all surfaces while offering a low rolling resistance, the Panaracer GravelKing is the perfect tire for a do-it-all bike that will be used both on asphalt and mixed surfaces. Thanks to a generous 40mm width, the GravelKing is also the right choice for those looking for a sporty yet comfortable bike. Black version.

+0 €

Designed to provide excellent grip on all surfaces while offering a low rolling resistance, the Panaracer GravelKing is the perfect tire for a do-it-all bike that will be used both on asphalt and mixed surfaces. Thanks to a generous 40mm width, the GravelKing is also the right choice for those looking for a sporty yet comfortable bike. Skinwall (Brown sides) version.

+10 €

Designed with gravel bikes in mind, this all-purpose tyre is equally at home on mountain trails and asphalt roads. Thanks to its low profile knobs, it offers both perfect grip on any surface and low rolling resistance. Super-wide, it can roll at very low pressures, offering great natural suspension exactly where it matters most: near the ground.

TUBES

If you prefer the old and good way to run your tires, choose this option and we will install top quality tubes from Schwalbe

+20 €

If you prefer a tubeless setup, choose this option and we will install on your wheels quality tubeless valves and tape from DT Swiss and some Effetto Mariposa Sealant.

RIMS

A high-end welded rim light enough for gravel and all-road use but with mountain bike long-lasting durability. Inner = 25mm // Weight= 475gr // Max. system weight = 130 Kg // 32 Spokes. We will use the 650B (27,5") or the 700C (28"/29"") version to hand build your wheels, according with the tire size selected. Note: We remove the stickers by default. If you want we keep them, just let us know.

SPOKES

DT-Swiss Competition spokes are double-butted, with a 1.8mm diameter middle section and 2.0mm ends, reducing weight and increasing flexibility for a wide range of uses. They are cold-forged for ultimate strength and durability.

FRONT HUB

A top quality front hub from Kappstein in Germany. It's light and stylish, and it meets all the requirements to be the perfect hub on our bikes: Thru Axle 12mm, 32 Spokes and 6 Bolt rotor.

-60 €

Choose this option if you choose the below "integrated lighting system" option, where a SON 28 dynamo hub is included.

REAR HUB

This new generation hub was developed in cooperation with the hub and wheel specialists from DT Swiss®. The H3R is a single-speed hub optimized for Pinion gearboxes and is built around the proven RATCHET® freewheel system. Due to the HYBRID technology it is specifically designed for high-load applications. It is equipped with the new HYBRID steel freehub body and feature a reinforced axle and hub body. It stand for proven DT Swiss technology and straightforward functionality with low care and maintenance required.

WHEEL AXLES

Top quality Thru Axles designed, tested and made in Bend, Oregon, USA. We use a special version made to accept anti-theft magnetic inserts from Hexlox, so they'll be ready for them whether you choose to add them to your bike now (you'll see the option below), or in the future.

STEM

This stem from Procraft in Germany is light, stiff and stylish. Made from aluminium 6061 and finished in an elegant matte black.

+50 €

A go-to stem for quality builds. Made in the USA, it claims to have the best combination of weight and strength available. Rugged enough for downhill riding but light enough for cyclocross.

+70 €

Ultralight stem from Tune, which still offers a high strength through its optimized conical shape. CNC machined and finished in a gloss black anodized

+120 €

A supremely lightweight and durable option to match your titanium frame, with a slim and minimalist design.

+140 €

With 15-20mm of travel for comfort and control, the Kinekt suspension stem is designed to reduce arm, wrist, and shoulder discomfort. It significantly reduces high-frequency vibration felt through the handlebars due to uneven terrain. Kinekt Stem comes with 3 different easy to change springs to adjust to your riding style and terrain.

SEATPOST

An industry standard for seatposts. With forged clamps, an integrally machined head, and elliptically extruded 7000 series aluminium body. Extremely easy to adjust the saddle position and angle.

+70 €

If you’d like to match your Nua frame with an elegant and minimalist seatpost which gives a more comfortable ride thanks to the flexibility of titanium, choose this option. Laser engraved Nua logo.

SEATPOST CLAMP

The SC2 saddle clamp from 3min19sec has two cross nuts. They make sure that the clamping bolt is always straight. The bolt is also easier to tighten and the tension is evenly distributed over the entire clamping area

+20 €

Exquisite minimal and super light collar from Tune in the Black Forest, Germany. BLACK

+20 €

Exquisite minimal and super light collar from Tune in the Black Forest, Germany. RED

+35 €

Our Titanium seatpost clamp will match perfectly your titanium frame and will last forever.

HANDLEBAR

A cutting-edge "dirt drop bar" developed for gravel and dirt touring use. Thanks to its open and wider profile, it allows for better control while riding off-road. Made out of Aluminum 7075-T6, it only weighs 330g.

SADDLE

Constructed in weather-proof materials: a vulcanised natural rubber top for flexible performance requiring no breaking-in period, and a waterproof nylon cover which performs flawlessly in all conditions. With a 140mm width, it is designed for a forward, more sporty riding position.

+0 €

With a similar design to the B-17 but constructed in weather-proof materials: a vulcanised natural rubber top for flexible performance requiring no breaking-in period, and a waterproof nylon cover which performs flawlessly in all conditions. With a 162mm width, it is designed for a semi-upright riding position. BLACK

+110 €

Designed and made in Berthoud workshop, based in beautiful South Burgundy, France, with the best thick vegetable tanned leather. With a 146mm width, this is the narrowest Berthoud saddle, intended for sports use. And with its titanium rails and only 365gr, is also the lightest leather saddle out there. BLACK

+110 €

Designed and made in Berthoud workshop, based in beautiful South Burgundy, France, with the best thick vegetable tanned leather. With a 146mm width, this is the narrowest Berthoud saddle, intended for sports use. And with its titanium rails and only 365gr, is also the lightest leather saddle out there. BROWN

+120 €

Designed and made in Berthoud workshop, based in beautiful South Burgundy, France, with the best thick vegetable tanned leather. Designed with randonneuring and long distance riding in mind, with a width of 157mm will give you maximum comfort with a slightly angled torso position. This is the high end version with titanium rails, offering superior vibration dampening and less weight.. Aravis has a highly resistant technical composite backplate and nose parts for flex and vibration dampening and is fully serviceable with only 2 standard tools (5mm allen key and TX20 key) BLACK

+120 €

Designed and made in Berthoud workshop, based in beautiful South Burgundy, France, with the best thick vegetable tanned leather. Designed with randonneuring and long distance riding in mind, with a width of 157mm will give you maximum comfort with a slightly angled torso position. This is the high end version with titanium rails, offering superior vibration dampening and less weight.. Aravis has a highly resistant technical composite backplate and nose parts for flex and vibration dampening and is fully serviceable with only 2 standard tools (5mm allen key and TX20 key) BROWN

-80 €

If you want to use your own pedals, choose this option.

BAR TAPE

A padded rubber bar tape with a tough and durable surface providing excellent grip in all weather conditions. BLACK

+20 €

Natural vegetable-tanned leather, long lasting and good looking. Combines perfectly with your leather saddle. BLACK

+20 €

Natural vegetable-tanned leather, long lasting and good looking. Combines perfectly with your leather saddle. BROWN

LIGHTING SYSTEM

If you'd prefer not to add lights to your bike at this point, choose this option.

+480 €

A complete and permanent lighting system integrated into your bike. Battery-free, worry-free and powered by your own legs (although so efficient that you won’t notice it). Composed of a SON Edelux II front light (installed on the fork crown), and a SON rear light (installed on the seat post or on rear rack if you have one). If you choose this option we will build your front wheel with the efficient and light SON 28 dynamo hub, the best one out there. We add the new SON coaxial hub connector to make easier wheel removal. We can go with a red SON if you want, just let us know on the comments section.

+45 €

A kit of minimalist and super-light battery-powered front and rear lights, with 20 and 11 lumens of lighting power respectively. Rechargeable batteries with a USB connection. Four different steady and flashing modes give up to 10 hours of autonomy in eco mode and 2.5 hours in normal mode.

USB CHARGER

Choose this option if you do not want a USB charger on your bike.

+180 €

CinQ The Plug5 Pure is a state-of-the-art power supply system designed to charge USB devices through a dynamo hub. It is water- and shock-proof and generates a 5V/1,2A current suitable for any USB device. It is installed in your fork steerer, replacing the standard headset top cap. NOTE: In order to use a USB charger, you must select a permanent light pack option, as the charger functions thanks to the dynamo front hub.

MUDGUARDS

Choose this option if you'd prefer not to add mudguards to your bike.

+70 €

These super-stylish mudguards are constructed using an innovative sandwich technique (aluminium-plastic-aluminium), making them extremely stable and lightweight. The price includes the installation and perfect fit to your bike.

+140 €

These robust but stylish mudguards integrate a discreet rack where you can hang your panniers for daily use.

RACK

Choose this option if you'd prefer not to have a rack.

+80 €

A quality option from a leader in the bicycle rack industry. Constructed from stainless steel. Light and robust, this rack won't rust and it can carry up to 18kg.

+280 €

This amazing rear rack holds the world record: It is extremely lightweight with only 360 gr (including all mounting components/screws), but easily carries 26 Kg. That’s titanium: lightweight, highly tensile, ex­tremely weather-resistant. The AIRY is nearly indestructible.

+350 €

One of the most sophisticated ways to carry your luggage. With keywords like "titanium," "second luggage level" and "comfortable luggage surface," there‘s not much more to say about the new Liviano. A design masterpiece with absolutely no compromises between extremely low weight (500 gr) and impressive carrying load (26 Kg) and stability, including mounting option for a rear light.

BOTTLE CAGE

Choose this option if you'd prefer not to have a bottle cage.

+40 €

A super-lightweight titanium bottle cage to match your frame. Easily adjusted for the perfect bottle fit.

+80 €

Two super-lightweight titanium bottle cages to match your frame. Easily adjusted for the perfect bottle fit. One for your downtube and one for your seattube.

BELL

Choose this option if you'd prefer not to add a bell to your bike.

+25 €

Based in Japan, Crane is recognized as creating beautiful and nice sounding bicycle bells. The E-NE is their smallest and most minimalist model, in matte black.

+50 €

San Francisco-based Spurcycle has managed to create what seems to be the most beautiful bell in the world. With an elegant design worked down to the essentials, this bell makes a fine adornment on your Nua. Its strong and pleasing tone sounds up to 3 times longer compared to other bells, made possible by high-grade premium brass and stainless steel craftsmanship. Precision built in the USA for a lifetime of way clearing.

WHEELS ANTI-THEFT SYSTEM

Choose this option if you'd prefer not to include anti-theft bolts in your order.

+50 €

The Hexlox Bike Wheel Security Set is the absolutely easiest way to instantly protect the wheels on your bike - against theft. With impeccable, minimalistic Berlin style! The kit includes two magnetic inserts for the wheels axles and a little key, and we add a second spare key.

ACCESSORIES

0 €

12 €

If you chose a Berthoud leather saddle, you might want to add a wax can. To maintain leather softness and aspect, spread once or twice a year Berthoud original wax under the leather of the saddle. You can apply it more often in the first few months to speed up the break-in process that a leather saddle needs to become extremely comfortable.

20 €

Pinion ask for an oil change every 10.000 km. And maybe we are a bit old school, but we think it's a good idea to have a first oil change after the running-in period (1000/2000 km). Either way, by adding this Genuine Pinion Oil Change Kit, you'll be prepared when the time comes.

10 €

Stainless little mug with carabinier hadle and subtle Nua logo. You will get one for free with your bike, but here you can buy a second one for a loved one

12 €

If you don't have tools, add to your order this Pedro's Star Hex key #4, #5 and #6, good quality and enough tip sizes to build-up and adjust your Nua

30 €

If you like to do the mechanical maintenance on your Nua yourself, you will need this tool to remove the Gates front sprocket.

15 €

With the Gates Universal Transmissions Belt Care you keep your Gates Carbon Drive running smoothly. The spray oil is used for sealing and preservation. After application, it forms a durable layer to which water beads off and dirt does not adhere too easily. 150ml.

FINAL PRICE: 5400.00 € + Taxes

TAXES

For bicycles shipped within the EU, we will add the VAT of the country of destination.

For bicycles shipped outside the EU, taxes or import duties will be charged by customs in the country of destination.

SHIPPING RATES

EUROPE: Bicycles 190€ / Framesets 110€

UK: Bicycles 260€ / Framesets 140€

SWITZERLAND: Bicycles 260€ / Framesets 140€

USA: Bicycles 440€ / Framesets 240€

AUSTRALIA: Bicycles 480€ / Framesets 270€

All prices include shipping insurance

DELIVERY TIME

18 weeks

PAYMENT

By wire transfer, 50% deposit to order, 50% balance before shipping.

Please fill in the form below with your personal data and your email address. Once done, click on "SEND" to receive a pdf file with a quote of your configuration.