NUA Ti-ROHLOFF Type B

FROM € 1900

FRAME

Titanium Gr.9 Ti-3Al-2,5V, Tire clearance 76mm-584 (27,5" PLUS) and 61mm-622 (29" 2,4") W/ Belt port // Sliding dropouts for Rohloff OEM and Post Mount brake mounts // 31,6mm seatpost // BSA 68mm BB // Internal cable routing for rear brake (top tube), rear light (top tube), Pinion shifter cables (down tube) and dropper seatpost (down tube and seat tube) // Oversized TR ID44mm headtube // Mounting holes for mudguard, rear rack, 3 water cages and 3-Pack on seat stays // NuaBikes logo engraved on the head tube // Hand brushed finish

FORK

Choose this option if you do not want your frame kit to come with a fork.

+600 €

Segmented // Titanium Gr.9 TI-3Al-2,5V Oversized tubing // Tire clearance 76mm-584 (27,5" PLUS) and 61mm-622 (29" 2,4") // Tapered 1-1/8" to 1-1/2" steerer // Disc brake PostMount 180mm // Thru Axle dropouts 100x12mm // Mounting holes for mudguards and 3-Pack on each blade // Internal cable routing for brake housing (left blade) and dynamo hub wire (right blade)

HEADSET

Choose this option if you do not want your frame set to come with a headset.

+80 €

A top quality, ‘worry free’ headset with a semi-integrated upper part and an external lower part, for head tubes with a 44mm internal diameter. German made, with stainless steel angular ball bearings in CNC machined aluminium caps (Only Black)

+190 €

Legendary quality and durability, the only headset with a lifetime warranty! Made in the USA, a tapered headset with a semi-integrated upper part and an external lower part, with stainless steel angular ball bearings in CNC machined aluminium caps. BLACK

+200 €

Legendary quality and durability, the only headset with a lifetime warranty! Made in the USA, a tapered headset with a semi-integrated upper part and an external lower part, with stainless steel angular ball bearings in CNC machined aluminium caps. RED

TRANSMISSION

Choose this option if you do not want your framekit to come with a belt and sprockets.

+350 €

Extremely durable, this drive system performs in the harshest conditions. Like all Gates drives it’s clean, silent, and virtually maintenance-free. Also, it doesn’t rust, which is a huge advantage in icy (and therefore salty) or wet climates. We combine it with Gates S550 cranks and a FSA BB. All black belt

+550 €

Extremely durable, this drive system performs in the harshest conditions. Like all Gates drives it’s clean, silent, and virtually maintenance-free. Also, it doesn’t rust, which is a huge advantage in icy (and therefore salty) or wet climates. On this option we combine it with T.A. Specialtes Arrow cranks and BB, making your bike about 350 lighter than with the Gates S550 cranks, and to our eye, more stylish, too. All black belt

PEDALS

If you want to use your own pedals, choose this option.

+90 €

The Shimano XT PD-T8000 pedals are a lightweight (392g the pair), high-end solution for those looking for a hybrid pedal that can be used both as a flat pedal (on one face) or as an SPD-compatible pedal (on the other face). This is the perfect choice for adventure bikes if you want to be able to use them during your everyday commute with normal shoes too.

+70 €

High-quality CNC design offer excellent grip on the trail and impress with a robust design. 8 pins per pedal side provide lots of safety – while the wide platform offers lots of space to change the position of your feet. Specs: 16 pins per pedal, 8 pins per side // Dimensions: approx. 100 x 98 x 18 mm // Bearings: extra long sleeve bearing, two sealed stainless steel cartridge ball bearings // Seal: R2 (rubber lip seal) // Material axle: CrMo steel (chrome-molybdenum alloy) // Weight: approx. 343 g (pair)

STEM

Choose this option if you do not want your frame kit to come with a stem.

+150 €

A supremely lightweight and durable option to match your titanium frame, with a slim and minimalist design.

SEATPOST

Choose this option if you do not want your frame kit to come with a seatpost.

+150 €

If you’d like to match your Nua frame with an elegant and minimalist seatpost which gives a more comfortable ride thanks to the flexibility of titanium, choose this option. Laser engraved Nua logo.

SEATPOST CLAMP

Choose this option if you do not want your frame set to come with a seatpost clamp

+30 €

Exquisite minimal and super light collar from Tune in the Black Forest, Germany. BLACK

+30 €

Exquisite minimal and super light collar from Tune in the Black Forest, Germany. RED

+10 €

The SC2 saddle clamp from 3min19sec has two cross nuts. They make sure that the clamping bolt is always straight. The bolt is also easier to tighten and the tension is evenly distributed over the entire clamping area

+45 €

Our Titanium seatpost clamp will match perfectly your titanium frame and will last forever.

HANDLEBAR

Choose this option if you do not want your frame kit to come with a handlebar.

+170 €

If you’d like to match your Nua frame with an elegant and minimalist handlebar which gives an extremely comfortable ride thanks to the flexibility of titanium, choose this option. 720mm long with a backsweep of 6°, and with 20mm of rise for a more comfortable riding position or to give that special touch to your bike.

+270 €

We affectionately call our adventure/bikepacking bar Toro Loco (Crazy Bull) for obvious reasons. It's 25º back sweep make it super comfortable and the horns give you and extra hand position very similar to the "hoods" position found on a drop (road/gravel) bar, making it also perfect for gravel and commuting.

+150 €

If you’d like to match your Nua frame with an elegant and minimalist handlebar which gives an extremely comfortable ride thanks to the flexibility of titanium, choose this option. Weighing only 209g, it’s 620mm long with a sweepback of 6°.

BOTTLE CAGE

Choose this option if you'd prefer not to have a bottle cage.

+40 €

A super-lightweight titanium bottle cage to match your frame. Easily adjusted for the perfect bottle fit.

+80 €

Two super-lightweight titanium bottle cages to match your frame. Easily adjusted for the perfect bottle fit. One for your downtube and one for your seattube.

BELL

Choose this option if you'd prefer not to add a bell to your bike.

FINAL PRICE: 1900.00 € + Taxes

TAXES

For bicycles shipped within the EU, we will add the VAT of the country of destination.

For bicycles shipped outside the EU, taxes or import duties will be charged by customs in the country of destination.

SHIPPING RATES

EUROPE: Bicycles 190€ / Framesets 110€

UK: Bicycles 260€ / Framesets 140€

SWITZERLAND: Bicycles 260€ / Framesets 140€

USA: Bicycles 440€ / Framesets 240€

AUSTRALIA: Bicycles 480€ / Framesets 270€

All prices include shipping insurance

DELIVERY TIME

18 weeks

PAYMENT

By wire transfer, 50% deposit to order, 50% balance before shipping.

Please fill in the form below with your personal data and your email address. Once done, click on "SEND" to receive a pdf file with a quote of your configuration.