NUA Ti-PINION Type C // Titanium Gr.9 Ti-3Al-2,5V Tubes and GR.5 Ti-6Al-4V machined headset, dropouts, Pinion bridge // Tire clearance 66mm-622 (29" 2,6") // Belt port // Sliding dropouts for 142x12mm hub (Thru Axle 165x12mmx1,5mm) and Post Mount brake mounts // 31,6mm seatpost // Internal cable routing for rear brake (top tube), Pinion shifter cables (down tube) and dropper seatpost (down tube and seat tube) // TR ID44mm headtube // Mounting holes for rear rack, 3 bottle cages and top tube bag // NuaBikes logo engraved on the head tube and anodized on down tube // Hand brushed finish (Sand blasted matte option +100€) // Included Thru Axle Robert Axle Project LIG604 L=172mm, M12X1.5mm with 5mm spacer

29 x 2.8" // Tapered 1-1/8" to 1-1/2" steerer // Travel: 140mm // Offset: 44mm // TA: 15X148mm (Boost) // Stanchion Diameter: 35mm // Post Mount 7" 180mm direct mount rotor, up to 203mm rotor // Spring tech: COILPAIR APT // Damping tech: INCONTROL/PLUSHPORT // Compression: 3-Position Adjust (Open, Drive, Lock) // Rebound: Yes // Suspension Stiffness: air pressure adjust // Remote: No (lever on crown) // Weight Limit: 130 kg // Black

Tapered 1-1/8" to 1-1/2" steerer // Travel: 140mm (adjustable up to 170mm in 10mm steps) // Offset: 44mm // TA: 15X148mm (Boost) // Spring Type: Air spring // Damping: Open bath cartridge // Adjustments: Rebound/Air spring/Progression/Compression // Post Mount 7" 180mm direct mount rotor, up to 203mm rotor // Remote: No

A top quality, ‘worry free’ headset with a semi-integrated upper part and an external lower part, for head tubes with a 44mm internal diameter. German made, with stainless steel angular ball bearings in CNC machined aluminium caps (Only Black)

Legendary quality and durability, the only headset with a lifetime warranty! Made in the USA, a tapered headset with a semi-integrated upper part and an external lower part, with stainless steel angular ball bearings in CNC machined aluminium caps. BLACK

Legendary quality and durability, the only headset with a lifetime warranty! Made in the USA, a tapered headset with a semi-integrated upper part and an external lower part, with stainless steel angular ball bearings in CNC machined aluminium caps. RED

Made in England, made in-house. For decades, Hope components have been machined in-house with precision and quality beyond any doubt. Upper HSC2 ZS44/28.6, lower HSCH EC44/40 BLACK

Made in England, made in-house. For decades, Hope components have been machined in-house with precision and quality beyond any doubt. Upper HSC2 ZS44/28.6, lower HSCH EC44/40 PURPLE

High-end sports car transmission technology, made in Germany. Being centrally mounted, this gearbox has the advantage of better weight distribution than an IGH, meaning improved manoeuvrability. With a super-light magnesium casing. Its 600% range is perfect for touring, as well as day-to-day riding in any terrain.

High-end sports car transmission technology, made in Germany. Being centrally mounted, this gearbox has the advantage of better weight distribution than an Internal gear hub, meaning improved maneuverability for your bicycle. With a super-light machined alloy casing. It's impressive 636% range is the higher you will find on any gear system on this planet.

The standard Pinion rotary shifter for flat bars, designed in collaboration with Ergon, is super ergonomic and works flawlessly and as all rotaries, can shift all the gears you need at the same time.

With the same specifications as the XT 8000, but with 4 pistons instead of the usual 2, giving them 20% more braking power. These brakes are especially indicated for heavy loads or long descents. With this version we use 180mm diameter rotors, which also increase braking power.

The Tech 4 E4 builds on Hope's 25+ years’ experience designing and manufacturing hydraulic brake systems. The Tech 4 uses all new internal sealing for reduced friction and the pivot spins on roller bearings, allowing the spring rate to be reduced. The lower spring rate in turn gives a lighter lever action, reducing rider fatigue and keeping Hope's legendary feel and modulation. The updated E4 caliper utilises hybrid style Stainless steel pistons with a phenolic insert allowing for smoother movement and less maintenance, while still able to manage high temperatures without heat transfer during extreme use. Included Hope Floating rotors in black.

The Tech 4 E4 builds on Hope's 25+ years’ experience designing and manufacturing hydraulic brake systems. The Tech 4 uses all new internal sealing for reduced friction and the pivot spins on roller bearings, allowing the spring rate to be reduced. The lower spring rate in turn gives a lighter lever action, reducing rider fatigue and keeping Hope's legendary feel and modulation. The updated E4 caliper utilises hybrid style Stainless steel pistons with a phenolic insert allowing for smoother movement and less maintenance, while still able to manage high temperatures without heat transfer during extreme use. Included Hope Floating rotors in purple.

Extremely durable, this drive system performs in the harshest conditions. Like all Gates drives it’s clean, silent, and virtually maintenance-free. Also, it doesn’t rust, which is a huge advantage in icy (and therefore salty) or wet climates. We use the stainless steel sprockets version for the maximum durability, and an all black belt.

Rugged quality forged aluminium cranks which come standard with all Pinion gearboxes.

High-end CNC cranks, machined from 7075 alloy billets. Compatible with all Pinion gearboxes.

If you want to use your own pedals, choose this option.

High-quality CNC design offer excellent grip on the trail and impress with a robust design. 8 pins per pedal side provide lots of safety – while the wide platform offers lots of space to change the position of your feet. Specs: 16 pins per pedal, 8 pins per side // Dimensions: approx. 100 x 98 x 18 mm // Bearings: extra long sleeve bearing, two sealed stainless steel cartridge ball bearings // Seal: R2 (rubber lip seal) // Material axle: CrMo steel (chrome-molybdenum alloy) // Weight: approx. 343 g (pair)

The side lugs of the Maxxis Minion DHR II Dual EXO WT TR Skinwall 29+ folding tyre are inherited from the popular Minion Front and provide excellent cornering grip. The shovel-like centre lugs provide maximum traction and braking control. And the brown sides are cool!

If you prefer a tubeless setup, choose this option and we will install on your wheels quality tubeless valves and tape from DT Swiss and some Effetto Mariposa Sealant.

A high-end welded rim light enough for gravel and all-road use but with mountain bike long-lasting durability. Inner = 25mm // Weight= 475gr // Max. system weight = 130 Kg // 32 Spokes. We will use the 650B (27,5") or the 700C (28"/29"") version to hand build your wheels, according with the tire size selected. Note: We remove the stickers by default. If you want we keep them, just let us know.

DT-Swiss Competition spokes are double-butted, with a 1.8mm diameter middle section and 2.0mm ends, reducing weight and increasing flexibility for a wide range of uses. They are cold-forged for ultimate strength and durability.

What to say about 350 DT Swiss hubs? These hubs are considered a quality standard for many people, including us. It is based on the proven 240 hubs and only slightly heavier. That's why it is just the right hub for cyclists, who are looking for a reliable hub with high performance.

Building on Hope’s 30+ years of manufacturing hubs, the Pro 5 is the combination of all of their experience into a product to meet and exceed the demands of current and future bike technology. With a shell machined from forged aluminium billet, with larger spoke flange to enable stiffer wheel builds and sealed stainless Steel cartridge bearings.

Building on Hope’s 30+ years of manufacturing hubs, the Pro 5 is the combination of all of their experience into a product to meet and exceed the demands of current and future bike technology. With a shell machined from forged aluminium billet, with larger spoke flange to enable stiffer wheel builds and sealed stainless Steel cartridge bearings.

This new generation hub was developed in cooperation with the hub and wheel specialists from DT Swiss®. The H3R is a single-speed hub optimized for Pinion gearboxes and is built around the proven RATCHET® freewheel system. Due to the HYBRID technology it is specifically designed for high-load applications. It is equipped with the new HYBRID steel freehub body and feature a reinforced axle and hub body. It stand for proven DT Swiss technology and straightforward functionality with low care and maintenance required.

The new Pro 5 hub from Hope is really amazing. It has a new Pawls/Springs design to increase longevity, load capacity & a reduction of drag and now there are 108 points of engagement with a offset 6 pawl for an almost instant engagement. The shorter freehub is ideal for the use of Carbondrive sprockets, giving a symmetrical and stronger wheel. New Labyrinth seal has zero drag for incredible freewheeling. performance. And the new hub body profile offers increased stiffness without adding weight.

The new Pro 5 hub from Hope is really amazing. It has a new Pawls/Springs design to increase longevity, load capacity & a reduction of drag and now there are 108 points of engagement with a offset 6 pawl for an almost instant engagement. The shorter freehub is ideal for the use of Carbondrive sprockets, giving a symmetrical and stronger wheel. New Labyrinth seal has zero drag for incredible freewheeling. performance. And the new hub body profile offers increased stiffness without adding weight.

This stem is not only cool and beautifully machined, it is also super stiff for direct steering feeling.

An industry standard for seatposts. With forged clamps, an integrally machined head, and elliptically extruded 7000 series aluminium body. Extremely easy to adjust the saddle position and angle.

If you’d like to match your Nua frame with an elegant and minimalist seatpost which gives a more comfortable ride thanks to the flexibility of titanium, choose this option. Laser engraved Nua logo.

The Transfer Factory dropper seatpost from Fox Racing Shox with Genuine Kashima Coat and 150 mm travel shines with its short overall length and insertion depth. This makes it more compact and lighter. The Bowden cable for control is routed internally. In addition, the ease of maintenance has been improved. A top quality dropper for your Nua.

The SC2 saddle clamp from 3min19sec has two cross nuts. They make sure that the clamping bolt is always straight. The bolt is also easier to tighten and the tension is evenly distributed over the entire clamping area

Exquisite minimal and super light collar from Tune in the Black Forest, Germany. BLACK

Exquisite minimal and super light collar from Tune in the Black Forest, Germany. RED

Our Titanium seatpost clamp will match perfectly your titanium frame and will last forever.

The Hope seatpost clamp is manufactured on state-of-the-art CNC machines and can be securely mounted thanks to the oversized clamp screw.

The Hope seatpost clamp is manufactured on state-of-the-art CNC machines and can be securely mounted thanks to the oversized clamp screw.

If you’d like to match your Nua frame with an elegant and minimalist handlebar which gives an extremely comfortable ride thanks to the flexibility of titanium, choose this option. Weighing only 209g, it’s 620mm long with a sweepback of 6°.

If you’d like to match your Nua frame with an elegant and minimalist handlebar which gives an extremely comfortable ride thanks to the flexibility of titanium, choose this option. 720mm long with a backsweep of 6°, and with 20mm of rise for a more comfortable riding position or to give that special touch to your bike.

If you thought that a handlebar couldn't be cool as well as practical, you were wrong. Our MotoPapi bar is inspired by both Motocross and BMX handlebars, and with it you will get a more comfortable upright riding position, thanks to its 85mm rise (measured at the ends). Besides, due the original design, it has a very long straight grip so it can be cut quite a bit if necessary. And thanks to it cross bar, it will withstand the most aggressive use without problems. Length 780mm and 9º back sweep.

Comfort and dynamic response as an unbeatable combination: The SMC Men Sport Gel delivers optimum flow on the trail. An extra-thick orthopedic foam and anatomic gel pads reduce pressure points when seated while the men’s specific relief channel prevents soft-tissue numbness and pain. You’re comfortable in every position and ready to put the pedal to the metal. Leave saddle discomfort in the dust and enjoy the trails with the SMC Men Sport Gel!

The saddle of the marathon pros combines maximum power, comfort and freedom of movement, directing the pressure precisely onto the pedal. The optimized relief channel in the sensitive perineal area, OrthoCell® inlays, AirCell® padding and special gliding flanks for quick changes of position also inspire world-class bikers.

If you want to use your own saddle, choose this option.

The GA3 mini-wing offers the perfect combination of wrist support and trail performance. The GA3 optimally supports and relieves common wrist pain while the perfect ergonomics allows you the ergonomic control to take your ride to the limit.

Choose this option if you'd prefer not to have a bottle cage.

A super-lightweight titanium bottle cage to match your frame. Easily adjusted for the perfect bottle fit.

Two super-lightweight titanium bottle cages to match your frame. Easily adjusted for the perfect bottle fit. One for your downtube and one for your seattube.

Pinion ask for an oil change every 10.000 km. And maybe we are a bit old school, but we think it's a good idea to have a first oil change after the running-in period (1000/2000 km). Either way, by adding this Genuine Pinion Oil Change Kit, you'll be prepared when the time comes.

If you don't have tools, add to your order this Pedro's Star Hex key #4, #5 and #6, good quality and enough tip sizes to build-up and adjust your Nua

If you like to do the mechanical maintenance on your Nua yourself, you will need this tool to remove the Gates front sprocket.

With the Gates Universal Transmissions Belt Care you keep your Gates Carbon Drive running smoothly. The spray oil is used for sealing and preservation. After application, it forms a durable layer to which water beads off and dirt does not adhere too easily. 150ml.

Few things can be more practical than these straps. The fastest and safest way to attach a bag or any other package to a bike, they have become an essential element in the world of bikepacking. For us, Voile straps are the best straps on the world and that's why we have partnered with them ordering a handful of them with our logo, and in that beautiful sand color, matching very well the theme of our adventure bikes. Length: 25", Tan color, Printed Nua logo. Price per 1 unit. Let us know how many units you want to order in the comments box

Titanium cup with 300ml, capacity, perfect for your outdoors (and indoor!) beverage.

Titanium mug with convenient folding handles and lid. Perfect for preparing your favorite hot drink or food on your bikepacking outings.

No more plastic straws in the trash. Ours titanium one will last you forever. Maybe a good gift for that daughter who likes to drink everything through a straw?

This complete titanium set will withstand anything. Ultralight and unfazed by any dirt or weather conditions, it will be your ideal companion out there.